Morrison-Knudsen GP40FH-2 | ||
---|---|---|
Data Sheet Information Compiled by: Jean-Denis Bachand | ||
New: 23 January 2009 | Artwork by: Jean-Denis Bachand | |
- | ||
Builder: EMD | Engine: 645E | |
Cycle: 2 | Bore & Stroke: 9.2 X 10 | |
RPM Max/Min: | 900 / 250 | |
Type: V16 | Total Horsepower: 3000 | |
Main Generator: GM | Model: AR10 | |
Gear Ratio: 61:16 | Speed: 77 mph | |
Trucks: 4-Wheel | Configuration: B-B | |
Traction Motor Blowers: 4 | Model: Delco Electric Drive | |
Weight: 270,000 lbs | Traction Motors: GM D77 (4) | |
Tractive Effort (starting) 72,000 lbs @ 25% | Tractive Effort (continuous): 54,700 lbs @ 11.1 mph | |
Multiple Unit Capability: Yes | Dynamic Braking: Yes | |
Auxilary Generator: Delco 64-72 | Alternator: GM GMD14 | |
Air Compressor: Gerd. Denver | Model: WBO | |
HEP: Cummins | Model: 600hp | |
Air Brake: Westinghouse | Model: 26L | |
Quantity Built: 13 | Dates: 11/1987 to 3/1988 | |
- | - | |
Exterior Dimensions | GP40FH-2 | |
Total Length | 62'-08" | |
Wheel Diameter | 40" | |
Truck Wheel Base | 9'-00" | |
Height to Top Hood | 14'-06" | |
Height to Top Cab | 15'-05" | |
Cab Width | 10'-04" | |
Hood Width | 10'-03.5" | |
Height of Walkway | N/A | |
Walkway Width | N/A | |
Center Bolster | 37'-03" | |
Center Front Truck to Front Pilot | 3'-10" | |
Center Rear Truck to Rear Pilot | 3'-10" | |
Distance between Truck Centers | 46'-03" | |
Minimum Turning Radious | 42 degrees | |
- | - | |
Fuel Oil: 1800 gal. | Lubricating Oil: 243 gal. | |
Engine Cooling Water: 254 gal. | Sand Capacity: 56 cu. ft. | |
Options: - | ||
- | ||
|